Motorized Lead Screw Adjustable Tank Rotators Travel Bogie Pipe Fit-up and Fine Adjusting HGKS40 manufacturer from China Guoheng Machinery Company

Motorized Lead Screw Adjustable Tank Rotators Travel Bogie Pipe Fit-up and Fine Adjusting

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: HGKS40

1. Purpose and Applicable Range

This tank rotators are motorized lead screw type with motorized travel bogie. Its structur

1. Purpose and Applicable Range

This tank rotators are motorized lead screw type with motorized travel bogie. Its structure is upper roller-bed and lower roller-bed. The lower roller-bed is adjustable by motorized lead

screw too. User can adjust and align by motorized roller and lower roller-bed for fine adjusting and aligning. This product is used for pipe fit-up and welding or wind tower production.

2. Main Technical Parameters

No	Item		Parameters
1)	Model		HGKS60
2)	Rated load and rotation capacity (T)		60
3)	Suitable work-piece	d mm	800
		D mm	4800
4)	Roller Dia. and Width	D1	400
		W3	200*2
5)	Linear speed (m/h)		6-60
6)	Way of speed control		VFD
7)	Motor power (kW)		2*2.2
8)	Roller distance A(mm)	Min	800
		Max	2000
9)	Roller distance adjusting		Motorized lead screw
10)	Motor power for roller distance adjusting (KW)		0.55KW
11)	Upper roller-bed unit		Motorized lead screw
12)	Motor power for upper roller-bed adjusting (KW)		0.75KW
13)	Roller bed travel		Motorized
14)	Motor power for travel bogie		0.75KW*4
15)	Travel bogie moving speed (mm/min)		2000mm/min
16)	Power supply		440V 60HZ 3P

3. Characteristics and Performance

    The HGKS series is welding turning rolls adjusted by motorized lead screw. East set consists of one
    driving turning roll, one idler turning roll and electric system.
    Distance between two rollers is adjusted by motorized lead screw; Driving turning roll adopts double driving, 2 rollers are driven by 2 motors via 2 reducers; the output speed of 2 motors
    controlled by one inverter, which can ensure the same linear speed for two driving rollers. Work piece
    revolves stably;
    its linear speed can meet demands of various welding as manual welding, strip welding and auto SAW etc.
    The upper roller beds of both driving and idle units also can be motorized adjusting. And the driving and idle units can be motorized traveling.
    Two rollers, two motors and reducers are fit on the pedestal of driving frame. Two idler rollers are fit on the bed of idler frame.
    Both power and idler rollers are PU rollers with high rigidity, good wearability and long life.
    For different Dia. of work piece, adjust distance between two rollers by motorized lead screw.
     After putting work piece, make sure the surrounding angle is between 45°110°.

4. Reference Photos